Raise your hand. Ringlet listens.
A ceramic signet ring with a microphone and a raised thumb pad, made for smart glasses.
Eight millimetres, with everything inside
Shell, core and circuit, lifted apart and put back.
- Shell
- White zirconia, 0.60 mm under the pad. Touch works through it; metal would not.
- Core
- Black epoxy around the parts. It forms the bore and the dark ring on each side.
- Circuit
- Flex with four rigid islands, one length for every size.
- Power
- A flat cell in the head, the same in every size, and a coin motor.
Lift your hand, hold the pad, speak
The motion sensor sees your hand rise. Thumb on the pad opens the microphone; let go and it closes.
- Microphone
- TDK T5838, bottom port, 68 dB(A) SNR
- Port
- 1.6 mm through the flank, behind a Gore acoustic vent
- Radio
- Nordic nRF5340, Bluetooth LE Audio
A raised pad under the thumb
Tap to select, tap twice to go back, hold for the menu, slide along the pad to scroll. The thumb finds it without looking.
- Sensor
- Five-segment capacitive slider
- Through
- 0.60 mm of zirconia under a 0.35 mm raised pad
- Feedback
- Coin motor: one pulse on open, two on close
Drop it in on edge
A magnet pair turns the ring until its coil sits over the dock. No contacts to corrode.
- Coupling
- Flex coil in the ring, ferrite-backed coil in the dock
- Dock
- 36 mm puck, USB-C
- Charge
- Full in under an hour, target
Four short boards on one strip
Rigid board cannot bend around a finger. The chips sit on four islands, none longer than 5 mm. Two of them ride the straight runs beside the head, and the flex lies flat under the pad.
The numbers, revision B
Engineering targets for the pilot build.
| Band | 8.00 × 3.40 mm with a 1.4 mm signet head, zirconia shell, epoxy bore |
|---|---|
| Pilot sizes | US 8, 9, 10, 11 and 12 |
| Mass | 5.7 to 6.3 g by size |
| Battery | About 17 mAh in every size, estimate |
| Runtime, estimated | 1.7 to 2.8 h streaming, 20 days or more standby |
| Motion | ST LSM6DSO six-axis sensor |
| Host | USB-C dongle, or direct LE Audio on Android 13+ |
| Ingress | IP67 target |
Turn the size 10 ring yourself
The assembly from the same model as the drawings. Drag to rotate.
Drawn for the factory
One parameter file drives the model, the STEP files, the drawings and these films. The whole pack is yours to download: the idea, the drawings, the CAD and how to reach us.



Ready to quote
STEP for five sizes, a BOM with alternates, assembly and test steps, and the request for quote in English and 中文, with a start-here guide.

Building the first hundred
Revision B puts the battery in a signet head and is ready for ring makers in Shenzhen. Four choices are still open.
Talk to us about the pilot- Charging6.78 MHz flex coil, or the factory’s 125 kHz
- Touch chipIQS7222C is not for new designs
- Motor6 by 2 mm coin motor, part to confirm
- Head cellAbout 17 mAh, custom flat cell for Grepow to quote
All images are renders of the engineering model.